Webinar Archives | INTAMSYS https://www.intamsys.com/tag/webinar/ Industrial 3D Printer for PEEK ULTEM PPSU Thu, 19 Oct 2023 10:16:00 +0000 en-US hourly 1 https://wordpress.org/?v=5.8.9 Getting the Best Out of Engineering Materials with INTAMSYS https://www.intamsys.com/getting-the-best-out-of-engineering-materials-with-intamsys/ https://www.intamsys.com/getting-the-best-out-of-engineering-materials-with-intamsys/#respond Thu, 14 Sep 2023 01:44:56 +0000 https://www.intamsys.com/?p=51336 Prepare for a deep dive into the world of 3D printing with polymers at ADDITIV Polymers World! This groundbreaking virtual event on October 5th, 2023, is your gateway to unlocking the potential of polymer-based 3D printing. Discover the suitability, applications, and certification of polymers in additive manufacturing during this free half-day event from 9:00 AM

The post Getting the Best Out of Engineering Materials with INTAMSYS appeared first on INTAMSYS.

]]>
3DNatives

Prepare for a deep dive into the world of 3D printing with polymers at ADDITIV Polymers World! This groundbreaking virtual event on October 5th, 2023, is your gateway to unlocking the potential of polymer-based 3D printing. Discover the suitability, applications, and certification of polymers in additive manufacturing during this free half-day event from 9:00 AM to 1:30 PM EDT (3:00 PM – 7:30 PM CEST). Engage in panel discussions covering topics like high-performance polymers, consumer goods, and a circular economy through additive manufacturing. Plus, attend workshops on parts certification, blending traditional and additive manufacturing, and post-processing techniques.

In the workshop hosted by our Head of Engineering——Grant Luttinen at 11:20 AM EDT&5:20 PM CEST, we aim to shed light on the transformative effects of printing engineering materials in a heated environment. We will present compelling data obtained from extensive internal testing across a wide range of equipment, including anonymous competitors. Our findings challenge conventional wisdom, revealing the astounding potential of heated chambers in elevating part strength.

Don’t miss out on this exciting free event on October 5th!

AMUG 2023

Highlights:

Z Tensile Strength Boost
Prepare to be astonished as we unveil data showing a staggering 370% increase in Z tensile strength when printing a PC part in a heated chamber compared to an enclosed printer without active chamber heating.

Why attend?

While the concept of increased part strength when printing in a heated chamber is widely known, the extent to which it can enhance part strength remains relatively unexplored. We believe that our research has the potential to revolutionize your approach to engineering materials.

Date: October 5th, 2023

Time: 11:20-11:40 AM EDT 

           5:20-5:40 PM CEST

Location: Online Webinar

Watch Recording

Join us as we embark on a journey to uncover the hidden potential of heated chambers in 3D printing. Be part of the conversation that could reshape the future of engineering materials. Register today and mark your calendar for a workshop that promises to be both informative and transformative.

ﾠ

intamsys logo

INTAMSYS is a world-leading high-tech company that provides high-performance 3D printing materials, direct additive manufacturing solutions and software. Co-founded by a team of engineers with years of precision equipment development and high-performance material research, the company is headquartered in Shanghai. Currently, it has established a complete marketing and after-sales service system covering the whole world, with 2 European and American marketing and technical service centers, respectively located in Germany and in the United States. INTAMSYS focuses on aerospace, automotive, electronic manufacturing, consumer products, medical, scientific research and other industries, providing complete additive manufacturing solutions, from functional test prototyping, tooling fixture manufacturing to customized mass production. For further information, contact us at info@intamsys.com.

The post Getting the Best Out of Engineering Materials with INTAMSYS appeared first on INTAMSYS.

]]> https://www.intamsys.com/getting-the-best-out-of-engineering-materials-with-intamsys/feed/ 0 How to enable complex geometries with INTAMSYS support material solutions? https://www.intamsys.com/how-to-enable-complex-geometries-with-intamsys-support-material-solutions/ https://www.intamsys.com/how-to-enable-complex-geometries-with-intamsys-support-material-solutions/#respond Mon, 04 Sep 2023 06:02:11 +0000 https://www.intamsys.com/?p=51315 Are you ready to dive into the cutting-edge world of 3D Printing Industry? Join us for an insightful and captivating webinar that will focus on enabling complex geometries with INTAMSYS support material solutions. During the webinar, we will try to answer the question of how different applications can be printed with the help of INTAMSYS

The post How to enable complex geometries with INTAMSYS support material solutions? appeared first on INTAMSYS.

]]>
intamsyswebinar

Are you ready to dive into the cutting-edge world of 3D Printing Industry? Join us for an insightful and captivating webinar that will focus on enabling complex geometries with INTAMSYS support material solutions.

During the webinar, we will try to answer the question of how different applications can be printed with the help of INTAMSYS breakaway support materials (HIPS, SP3050, SP5040 and SP5080), water-soluble support materials (PVA and SP3030) and hybrid support materials (SP5000).

The webinar will be 1 hour with two different sessions for different time zones and in both sessions, the last 15 minutes will be dedicated to Q&A session.

Date: September 20, 2023

Time: 11 AM CET (Central European Time) / 5 AM EDT (Eastern Daylight Time) 

           5 PM CET (Central European Time) / 11 AM EDT (Eastern Daylight Time)

Location: Online Webinar

Watch Recording
AMUG 2023

What you will learn:

– Advantages of using dual nozzle and the disadvantages of not using dual nozzle

– Exploring INTAMSYS 3D Printers with dual nozzle (FUNMAT PRO 310, FUNMAT PRO 610HT and FUNMAT PRO 410) and the usage of support materials

– INTAMSYS Support Material Solutions and the complex geometries you can print by using our solution

The Speaker:

Timm Woszidlo, Application & Technical Support Manager – INTAMSYS Technology GmbH

With a wealth of knowledge acquired over 7 years of dedicated 3D Printing experience, Timm Woszidlo possesses an extensive understanding of the 3D Printing industry, including its technical intricacies, material capabilities, potential applications, and the technology itself.

Since joining INTAMSYS Technology GmbH in 2019, he has been supporting technical projects and working on different applications. He has been actively involved in numerous projects that have showcased the potential of 3D printing across diverse applications throughout his career.

Don’t miss out on this opportunity to gain an insight to complex geometries with support material solutions! 

ﾠ

intamsys logo

INTAMSYS is a world-leading high-tech company that provides high-performance 3D printing materials, direct additive manufacturing solutions and software. Co-founded by a team of engineers with years of precision equipment development and high-performance material research, the company is headquartered in Shanghai. Currently, it has established a complete marketing and after-sales service system covering the whole world, with 2 European and American marketing and technical service centers, respectively located in Germany and in the United States. INTAMSYS focuses on aerospace, automotive, electronic manufacturing, consumer products, medical, scientific research and other industries, providing complete additive manufacturing solutions, from functional test prototyping, tooling fixture manufacturing to customized mass production. For further information, contact us at info@intamsys.com.

The post How to enable complex geometries with INTAMSYS support material solutions? appeared first on INTAMSYS.

]]> https://www.intamsys.com/how-to-enable-complex-geometries-with-intamsys-support-material-solutions/feed/ 0